Fender Hash Marks Decal | Customizable with Knifeless Tape | 2" 3" and 4" widths | 5 Colors

Fender hashmarks made from high-quality Oracal 651 material. Choose from combo of 2", 3", and 4" widths. Four 2-foot stripes are included for a total of 8 feet of material. 

Choose from 5 Colors: Gloss Black, Matte Black, White, Silver, Red

6 feet of knifeless tape is included. This tape makes it easy to customize the hashmarks to your specific vehicle model - no scissors or x-acto knife required. 

Hashmarks are transfer-taped for easy application! 

Included with your order:

• Application-taped Fender Hashmarks (2 pair) 
• 6 ft of Knifeless Tape
• Squeegee

You will need:

• Scissors (x-acto knife optional)
• Masking tape

-2" and 3" kit shown in photos-

Application Instructions (see photos):

1. Apply knifeless tape where you want the stripes to begin and end. 
2. Determine the angle you would like your hashmarks.
3. Apply masking tape to top of decal to create a hinge.
4. Cut in between stripes - this makes for a smoother application process.
5. Peel backing off first stripe. 
6. Gently and evenly squeegee stripe into place. 
7. Repeat steps 5 and 6 for second stripe. 
8. Remove all masking tape from hashmarks.
9. If covering any lines, use x-acto knife and squeegee to smooth vinyl into place.
10. Gently tug end of knifeless tape to expose filament. 
11. Press down on vinyl edge and pull back on the filament to cut across vinyl. 
12. Remove excess vinyl then remove the excess knifeless tape.